Skip to content

Ads

Ad sets & ads: improve a campaign without starting a new one

Turn ad sets and ads on or off in a live campaign, change an ad set's budget, targeting and schedule, add a new ad set to the same campaign or a new ad to an ad set, fatigue warnings, automatic rules and AI advice.

Opening a separate campaign for every new test throws away what Meta has learned so far. Instead, improve the campaign you already have: click an ad in the list and open the Ad sets & ads tab. The tab appears once the ad is set up in Meta; the numbers follow the Period selected at the top.

What you see

Each ad set in the campaign is listed as a card: its type (Main set, Warm audience, Added later or Created on Meta), learning status (Learning, Learning complete, Learning limited), budget, spend, number of results, cost per result and frequency. Below the card are the ads in that set with their Meta names (the same name the warnings use; the ad headline below it) and their own numbers.

Turn on / off

Use the switch next to an ad set or ad to turn just that one off; the campaign keeps running. When you turn off a poorly performing ad, the budget moves to the other ads in the same set. The last running ad of a set can't be turned off; use the set's switch to stop the set. To stop the whole campaign, use Pause in the list.

Budget

Press Budget on an ad set's card and enter the new amount. If you change the budget by more than 20% at once, Meta's learning may restart; the dialog warns you and shows the highest amount you can enter to raise it step by step.

Targeting

In the main set and in ad sets you added later, Targeting lets you change location, age, gender, interests, audiences, language, devices and placements. The bid setting stays the same. Changing targeting restarts that ad set's learning. The warm audience set's audience comes from Audiences and can't be changed here.

Schedule

Schedule picks the days and hours the ad set runs; when a schedule is set, the card shows how many hours a week it runs. Click or drag over the boxes, or start from a preset (All hours, Weekdays 09–18, Every day 09–21, Off at night). It only works on ad sets with a lifetime budget; on a daily-budget set the button says so. Don't change the schedule often; Meta may restart learning. The By hour section in the Ad report shows which hours to pick.

Performance goal

In website traffic campaigns, Performance goal on an ad set's card chooses what Meta tries to get the most of in that set:

  • Link clicks: shows the ad to people most likely to click. Clicks that leave before the page loads count too.
  • Landing page views: shows the ad to people likely to wait for the page to load. The Meta Pixel must be installed on the site. Cost per click is usually a bit higher, and visitors are better quality.

The chosen goal shows on the card. Changing it restarts that ad set's learning.

Meta's suggestions and review notes

Suggestions Meta shows for an ad set or ad in Ads Manager appear on the card under Meta's suggestion. If Meta rejected an ad or its delivery has a problem, the reason shows in red on the ad's row.

New ad set

Add ad set opens a new ad set in the same campaign with a different audience and its own budget; the campaign's ads are added to it too. Use it, for example, to try the same ad in another city or age group. If the campaign is live, the new ad set goes live right away; if it hasn't been published, it goes live together with Publish. The new ad set's budget is added to the campaign's total budget.

New ad

Add ad on an ad set's card adds an ad to that set with a new image (or Instagram post) and, if you like, new text; the form, destination and button stay the same as the campaign's. New text with AI writes text different from the current ad, and Generate image with AI adds a new image to your library. The new ad goes live after Meta's review. Leads and messages from these ads are counted in the same campaign's report.

At the top of the window you choose where the ad comes from:

  • New image (in an image campaign): an image or video from your library, and you write the text.
  • Post as it is (in a campaign created from a post): the post becomes an ad with its own caption, and its likes and comments show on the ad.
  • Post's video, my own text: the video of a video or Reels post becomes a new ad, and you write the text, headline and description. The post's likes and comments don't carry over. Meta takes a few minutes to process the video. If you see "Meta is still processing the video", wait a little and press Add ad again; the video isn't uploaded twice.

For a video ad (a video from your library or a post's video), Video cover lets you pick an image from your library. It shows before the video plays and in the feed. If you don't pick one, Meta chooses a frame from the video.

In website traffic and sales campaigns, type another address in Link for this ad to send that ad there (for example, a different product page for each ad). The campaign's UTM tags are added to this address too; if the address already has the same tag (for example an ad-specific utm_content), the one in the address stays. Leave it empty to use the campaign's link.

In website traffic and sales campaigns, Change link below the ad sets changes the page the campaign opens and its UTM tags. Meta doesn't let an ad's link be changed in place, so Talkty builds a new creative with the new address for each ad and switches the ad to it. The ad keeps its ID and stats. Ads with their own link stay as they are. Meta reviews the changed ads again. An ad may pause briefly during review and learning may restart.

Creatives

The Creatives tab in the ad details compares all of the campaign's ads in one table: thumbnail, angle (in a creative test), spend, impressions, reach, frequency, CTR, CPC (cost per click), CPM (cost per thousand impressions), results and cost per result. Numbers follow the Period at the top.

Video ads fill two more columns: Hook rate (people who watched at least 3 seconds ÷ impressions; whether the first seconds grab attention) and Completion (people who watched to the end ÷ plays). Image ads show "—" there. You can also pick a video in the Add ad window.

On the right are the CRM columns: Leads received, Won, Revenue, Cost per sale (spend ÷ won) and Return on ad spend (ROAS) (revenue ÷ spend). So you see whether the ad that brings the cheapest leads is also the one that brings the most sales. A sale refunded or cancelled in Finance doesn't count as won. CRM columns are all-time; which ad a lead came from is only recorded for leads received after this feature was added. ROAS isn't calculated when the ad account's currency differs from your workspace's.

The Winner badge is given per ad set: to the ad with the lowest cost per result among that set's ads with at least 1,000 impressions and 3 results. Sets reach different audiences (a warm audience is naturally cheaper), so ads aren't compared across sets. If no ad has reached that yet, it says "Collecting data"; don't turn ads off at this stage. Once there is a winner:

  • Turn off: pauses an active ad that isn't the winner; its budget stays with the set's other ads. The last running ad of an ad set can't be turned off.
  • Create a variation of the winner: opens the Add ad window with the winner's image and text, and AI writes new text in the same angle (uses tokens); edit it and add it to the winner's set.

The winner badge is only a suggestion; Talkty never turns ads off on its own.

Copy and edit

The copy icon on an ad's row (Copy and edit in the Creatives tab) opens the Add ad window filled with that ad's image and text. Change only what you want (e.g. the headline or the image) and add it to the same ad set as a new ad; the old ad stays as it is, and you can turn it off later. If you copy an ad from a creative test, the new ad keeps the same angle.

Warnings

At the top of the tab, things to look at are listed; most have a button to fix them in one click:

  • Ad fatigue: people saw the ad more than 3.5 times on average; add a new ad from a different angle, not a small change of the same image.
  • Expensive ad: its cost per result is twice the ad set average; turn it off.
  • Ad with no results: it spent money with no results while the set's other ads get results; turn it off.
  • Learning limited: Meta isn't seeing enough results; raise the budget step by step or merge similar ad sets.
  • Only one ad: add 2-3 different ads to the set so Meta can spend on the best one.
  • One concept only: all live ads in the set use the same image or post. That isn't a test; add an ad with a different image and angle.
  • Still learning: Meta is still learning the set (it's new or had a big change recently). No pause or add suggestions show for this set; until the numbers settle, don't turn ads off or change the budget and targeting.

Ads are compared only when the set has more than one ad turned on and enough spend.

Automatic rules

The Automatic rules card at the top of the tab has three optional switches; all start off. Once on, Talkty checks the campaign once every morning:

  • Turn off expensive ads automatically: pauses an ad whose cost per result is twice the set's average (or that spent that much without any result) once it has spent more than Minimum spend before pausing (default 200). The ad must be expensive both over its whole run and in the last 7 days; an ad that improved recently, or spent nothing in the last 7 days, isn't paused. A set's last running ad, and the ads of a set that is still learning, are never paused.
  • Notify on creative fatigue: sends a notification when people see an ad more than 3.5 times on average (at least 1,000 impressions); once per ad.
  • Notify when a winner is found: sends a notification when an ad set has a winning ad (the threshold in the Creatives tab); once per set.

Every automatic pause arrives as a notification and is written to the activity log. Paused ads are listed on the card under Paused automatically; Turn back on undoes it in one click. If you duplicate the campaign, the rules don't carry over. Rules run on live campaigns created in Talkty.

AI advice

Get AI advice looks at the numbers of your ad sets and ads and suggests which ad to turn off, which ad set to scale or where to add a new ad. Press Apply next to a suggestion to do it in one click; nothing changes until you approve. It never suggests turning off a set's last active ad, raising a budget by more than 20% at once, or any change to a set that is still learning. It uses tokens.

Campaigns imported from Meta

In imported campaigns you can turn ad sets and ads on or off and change their budgets; new ad sets, new ads and targeting changes are only available in campaigns created in Talkty.